The printer will print between 0 and 80 on the scale. Verify that the paper feed selector is in the “F” position. There are two types of selection: Unlock the tractors by pulling forward on the tractor clamping levers. Make sure the paper is straight. Align the center paper support so that it is centered between the tracks.

Uploader: Mikasa
Date Added: 6 February 2017
File Size: 31.69 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 46851
Price: Free* [*Free Regsitration Required]

Slide the tractors out towards the sides and raise the tractor covers. Epson LQ Italic Character set. Visually insure the tractor pins are in the center of the paper sprocket holes.

This releases the paper and allows the paper to be positioned manually as required. Align the ix paper support so that it is centered between the tractors.

PANASONIC KX-P/ SINGLE Overview – CNET

Align the paper sprocket holes with tractor pins and close tractor covers. When the [ROW] switch is pressed, the row position will advance sequentially from 1st to 7th.

Unlock the tractors by pulling forward on the tractor clamping levers.

Set the selector back to “F” before printing. The group type works in conjunction with other cells all of which are mutually exclusive if one is YES, all others must be No.

Panasonic KX-P1124

Press back on the tractor clamping levers locking the tractors in place. Replace the top cover so that it is totally forward. Cut sheet feeder Part KX-P Advances to the next column position on the Control Table.

Advances to the next row position on the Control Table. To release the self test mode, turn the power switch off. The interface connector is located on the back of the printer towards the left side. Font choices, for example, are of this type. The printer has a self test feature which allows the user to test the printer independently of the computer. There are two types of selection: The change will not occur until the current line is finished.

The printer allows the user to select the following 14 Initial Setup mode conditions. Align the paper horizontally without any slack, by using the marks on the rear cabinet as a guide. Pull up the tractors by pinching both panxsonic position shift levers and rotating the tractor upward.

Enter or exists the Function mode. This indicates the printer is in the Initial Setup mode. Replace the smoked plastic cover, inserting front first. As you lift, release the rear levers, continue lifting until tractors snap into place. Insert the continuous fanfold paper through bottom slot and pull it up as shown. These key switches allow you to select various important features and functions of the printer by setting the Control Table. Then they will be printed in draft mode for approximately 20 minutes.

Dot matrix: Panasonic Printer KX-P1124

Bottom and front pull-tractor feed. Slide the top cover toward the rear of the printer as shown. This replaces conventional DIP switches. Rotate the platen know or use the [LF] switch to adjust the paper so that it is at the desired first print position. The side on which you wish to print should face up.